日韩在线观看网站-日韩在线观看视频网站-日韩在线观看视频免费-日韩在线观看视频黄-日韩在线观看免费完整版视频-日韩在线观看免费

論文專著：

出版專著：

1、《微振動俘能技術》，高世橋; 劉海鵬; 金磊; 牛少華，.中國科學技術出版社, 2016.。

2、《混凝土侵徹力學》，高世橋，.中國科學技術出版社, 2013。

3、《微機電系統力學》，高世橋，劉海鵬 著 國防工業出版社，2008

4、《毛細力學》，高世橋，劉海鵬著，科學出版社, 2010

發表部分英文論文：

[1]Yin, Zuozong; Gao, Shiqiao*; Jin, Lei; Sun, Yaoqiang; Wu, Qinghe; Zhang, Xiyang; Guo, Shengkai. A dual impact driven frequency up-conversion piezoelectric energy harvester for ultralow-frequency and wide-bandwidth operation.Sensors and Actuators A: Physical , 2021, 331: 112961.

[2]Yin, Zuozong; Gao, Shiqiao*; Jin, Lei; Guo, Shengkai; Wu, Qinghe; Li, Zezhang. A shoe-mounted frequency up-converted piezoelectric energy harvester.Sensors and Actuators A: Physical , 2021, 318: 112530.

[3]Li, Zezhang; Gao, Shiqiao; Jin, Lei; Liu, Haipeng; Niu, Shaohua. Micromachined Vibrating Ring Gyroscope Architecture with High-Linearity, Low Quadrature Error and Improved Mode Ordering. Sensors, 2020, 20(15): 4327.

[4]Jin, Lei; Gao, Shiqiao; Zhang, Xiyang; Wu, Qinghe.Output of MEMS Piezoelectric Energy Harvester of Double-Clamped Beams with Different Width Shapes.Materials, 2020, 13(10): 2330.

[5]Xiao, Lijun; Li, Shi; Song, Weidong*; Xu, Xiao; Gao, Shiqiao. Process-induced geometric defect sensitivity of Ti-6Al-4V lattice structures with different mesoscopic topologies fabricated by electron beam melting. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2020, 778: 139092.

[6]Jin, Lei; Gao, Shiqiao*; Zhang, Xiyang.The effect of the beam shapes on the doubly-clamped piezoelectric energy harvester.Applied Mathematics and Mechanics (English Edition ), 2019, 40(9): 1361-1374.

[7]Li, Zezhang; Gao, Shiqiao*; Jin, Lei; Liu, Haipeng; Guan, Yanwei; Peng, Shigang. Design and Mechanical Sensitivity Analysis of a MEMS Tuning Fork Gyroscope with an Anchored Leverage Mechanism.Sensors, 2019, 19(16): 3455.

[8]Zhang Guangyi*; Gao Shiqiao; Liu Haipeng; Zhang Wenwu. Design and performance of hybrid piezoelectric-electromagnetic energy harvester with trapezoidal beam and magnet sleeve.Journal of Applied Physics, 2019, 125(8): 084101.

[9]Xu Xiao; Gao Shiqiao; Zhang Dongmei; Niu Shaohua*; Jin Lei; Ou Zhuocheng. Mechanical behavior of liquid nitrile rubber-modified epoxy resin: Experiments, constitutive model and application.International Journal of Mechanical Sciences, 2019, 151: 46-60.

[10]Zhou, Xiaoya; Gao, Shiqiao*; Jin, Lei; Liu, Haipeng; Li, Ping.Effects of changing PZT length on the performance of doubly-clamped piezoelectric energy harvester with different beam shapes under stochastic excitation. Microsystem Technologies, 2018, 24(9): 3799-3813.

[11]Xu, Xiao*; Gao, Shiqiao; Ou, Zhuocheng; Ye, Haifu.Mechanical Behavior of Liquid Nitrile Rubber-Modified Epoxy Resin under Static and Dynamic Loadings: Experimental and Constitutive Analysis.Materials, 2018, 11(9): 1565.

[12]Cui, Yan*; Yu, Menglin; Gao, Shiqiao; Kong, Xiangxin; Gu, Wang; Zhang, Ran; Liu, Bowen.Fabrication and characterization of a piezoelectric energy harvester with clamped-clamped beams.AIP Advances, 2018, 8(5): 055028.

[13]Zhang Xiyang; Gao Shiqiao; Li Dongguang; Jin Lei; Wu Qinghe; Liu Feng.Frequency up-converted piezoelectric energy harvester for ultralow-frequency and ultrawide-frequency-range operation.Applied Physics Letters, 2018, 112(16): 163902.

[14]Zhou Xiaoya; Gao Shiqiao*; Liu Haipeng; Jin Lei. Nonlinear Hybrid Piezoelectric and Electromagnetic Energy Harvesting Driven by Colored Excitation.Energies, 2018, 11(3): 498.

[15]Li Ping*; Gao Shiqiao; Cong Binglong.Theoretical modeling, simulation and experimental study of hybrid piezoelectric and electromagnetic energy harvester.AIP Advances, 2018, 8(3): 035017.

[16]Liu, Feng*; Gao, Shiqiao; Niu, Shaohua; Zhang, Yan; Guan, Yanwei; Gao, Chunhui; Li, Ping. Optimal design of high-g MEMS piezoresistive accelerometer based on Timoshenko beam theory.Microsystem Technologies, 2018, 24(2): 855-867.

[17]Li, Ping*; Gao, Shiqiao; Zhou, Xiaoya; Liu, Haipeng. On the performances of a nonlinear hybrid piezoelectric and electromagnetic energy harvester.Microsystem Technologies, 2018, 24(2): 1017-1024.

[18]Zhang, Dongmei*; Gao, Shiqiao; Niu, Shaohua; Liu, Haipeng.A PREDICTION METHOD FOR LOAD DISTRIBUTION IN THREADED CONNECTIONS.Journal of Theoretical and Applied Mechanics, 2018, 56(1): 157-168.

[19]Zhang, Dongmei*; Gao, Shiqiao; Liu, Haipeng; Liu, Zongbao; Niu, Shaohua. Real-time numerical calculation for penetration depth of projectiles into concrete targets.Mechanics Based Design of Structures and Machines, 2018, 46(4): 520-531.

[20]Gao Chunhui*; Gao Shiqiao; Liu Haipeng; Jin Lei; Lu Junhu; Li Ping. Optimization for output power and band width in out-of-plane vibration energy harvesters employing electrets theoretically, numerically and experimentally.Microsystem Technologies, 2017, 23(12): 5759-5769.

[21]Li Ping*; Gao Shiqiao; Zhou Xiaoya; Liu Haipeng; Shi Jitao. Analytical modeling, simulation and experimental study for nonlinear hybrid piezoelectric-electromagnetic energy harvesting from stochastic excitation.Microsystem Technologies, 2017, 23(12): 5281-5292.

[22]Jin, Lei; Gao, Shiqiao*; Zhou, Xiaoya; Zhang, Guangyi.The effect of different shapes of cantilever beam in piezoelectric energy harvesters on their electrical output.MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2017, 23(10): 4805-4814.

[23]Gao Chunhui; Gao Shiqiao; Liu Haipeng*; Jin Lei; Lu Junhu. Electret Length Optimization of Output Power for Double-End Fixed Beam Out-of-Plane Electret-Based Vibration Energy Harvesters.Energies, 2017, 10(8): 1122.

[24]Zhang, Guangyi*; Gao, Shiqiao; Liu, Haipeng; Niu, Shaohua. A low frequency piezoelectric energy harvester with trapezoidal cantilever beam: theory and experiment.MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2017, 23(8): 3457-3466.

[25]Zhang Dongmei*; Gao Shiqiao; Niu Shaohua; Liu Haipeng. Study on collision of threaded connection during impact. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2017, 106: 133-145.

[26]Yao, Fenglin*; Meng, Wenjun*; Gao, Shiqiao; Zhao, Jie; She, Zhanjiao; Yin, Hang.Research on the master-slave compound multi-cantilever piezoelectric energy harvester.Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems, 2017, 23(4): 1027-1044.

[27]Shiqiao Gao; Guangyi Zhang; Lei Jin; Ping Li; Haipeng Liu. Study on characteristics of the piezoelectric energy-harvesting from the torsional vibration of thin-walled cantilever beams. Microsystem Technologies, 2017, 6., ISSN 0946-7076.

[28]Zhou Xiaoya; Gao Shiqiao; Liu Haipeng*; Guan Yanwei. Effects of introducing nonlinear components for a random excited hybrid energy harvester.Smart Materials and Structures, 2017, 26(1): 015008.

[29]Lei Jin; Shiqiao Gao; Xiaoya Zhou; Guangyi Zhang.The effect of different shapes of cantilever beam in piezoelectric energy harvesters on their electrical output.Microsystem Technologies, 2016, 10.

[30]Dongmei Zhang; Shiqiao Gao; Xiao Xu.A new computational method for threaded connection stiffness.Advances in Mechanical Engineering, 2016, 8(2): 1-9.

[31]Zhang, Guangyi*; Gao, Shiqiao; Liu, Haipeng.A utility piezoelectric energy harvester with low frequency and high-output voltage: Theoretical model, experimental verification and energy storage.AIP Advances, 2016, 6(9): 095208.

[32]Li, Changlong; Gao, Shiqiao; Niu, Shaohua*; Liu, Haipeng.Study of Intrinsic Dissipation Due to Thermoelastic Coupling in Gyroscope Resonators.Sensors, 2016, 16(9): 1445.

[33]Niu, Shaohua*; Wang, Caifeng; Gao, Shiqiao.A novel crowd random loads model for pedestrians walking on footbridge. Archive of Applied Mechanics, 2016, 86(7): 1369-1381.

[34]Guan, Yanwei; Gao, Shiqiao; Liu, Haipeng*; Jin, Lei; Zhang, Yaping.Vibration Sensitivity Reduction of Micromachined Tuning Fork Gyroscopes through Stiffness Match Method with Negative Electrostatic Spring Effect. Sensors, 2016, 16(7): 1146.

[35]Li, Changlong; Gao, Shiqiao; Niu, Shaohua*; Liu, Haipeng.Thermoelastic coupling effect analysis for gyroscope resonator from longitudinal and flexural vibrations.Microsystem Technologies, 2016, 22(5): 1029-1042.

[36]Guan, Yanwei; Gao, Shiqiao; Liu, Haipeng*; Jin, Lei; Niu, Shaohua.Design and Vibration Sensitivity Analysis of a MEMS Tuning Fork Gyroscope with an Anchored Diamond Coupling Mechanism.Sensors, 2016, 16(4): 468.

[37]Li, Ping*; Gao, Shiqiao; Cai, Huatong; Wu, Lisen.Theoretical analysis and experimental study for nonlinear hybrid piezoelectric and electromagnetic energy harvester.Microsystem Technologies, 2016, 22(4): 727-739.

[38]Guan, Yanwei*; Gao, Shiqiao; Jin, Lei; Cao, Lianmin.Design and vibration sensitivity of a MEMS tuning fork gyroscope with anchored coupling mechanism.Microsystem Technologies, 2016, 22(2): 247-254.

[39]Guan, Yanwei*; Gao, Shiqiao; Liu, Haipeng; Niu, Shaohua.Acceleration sensitivity of tuning fork gyroscopes: theoretical model, simulation and experimental verification.Microsystem Technologies, 2015, 21(6): 1313-1323.

[40]Hai Peng, Liu; Shi Qiao, Gao; Lei, Jin.Study on the Energy Harvesting Performance of PE Cantilever Beam.Key Engineering Materials, 2015, 645-646: 1189-1194.

[41]Cui, Yan*; Zhang, Qunying; Yao, Minglei; Dong, Weijie; Gao, Shiqiao.Vibration piezoelectric energy harvester with multi-beam.AIP Advances, 2015, 5(4): 041332.

[42]Li, Ping*; Gao, Shiqiao; Cai, Huatong.Modeling and analysis of hybrid piezoelectric and electromagnetic energy harvesting from random vibrations.Microsystem Technologies, 2015, 21(2): 401-414.

[43]Cai, Huatong; Gao, Shiqiao; Li, Ping; Wang, Huamin.Design and experimental study of hybrid piezoelectric and electromagnetic harvester.Piezoelectrics & Acoustooptics, 2015, 37(2): 248.

[44]Li, Ping; Gao, Shiqiao; Cai, Huatong; Cui, Yan; Li, P.*.Design, fabrication and performances of MEMS piezoelectric energy harvester.International Journal of Applied Electromagnetics and Mechanics, 2015, 47(1): 125-139.

[45]Li, Ping*; Gao, Shiqiao; Cai, Huatong; Cui, Yan.Design, fabrication and performances of MEMS piezoelectric energy harvester.International Journal of Applied Electromagnetics and Mechanics, 2015, 47(1): 125-139.

[46]Zongbao Liu; Shiqiao Gao; Haipeng Liu; Dongmei Zhang; Lei He.Nonlinear adaptive noise-induced algorithm and its application in penetration signal.Measurement, 2014, 58: 556-565.

[47]Yao Fenglin; Gao Shiqiao; Zhao Jie; Liu Haipeng; Niu Shaohua; Jin Lei.Two-stage decoupled micro-machined gyroscope and noncontact vibration test.Proceedings of the Institution of Mechanical Engineers - Part N: Journal of Nanoengineering and Nanosystems , 2014, 228(3): 139-145.

[48]Li, Ping*; Gao, Shiqiao; Cai, Huatong; Wang, Huamin.Coupling effect analysis for hybrid piezoelectric and electromagnetic energy harvesting from random vibrations.International Journal of Precision Engineering and Manufacturing, 2014, 15(9): 1915-1924.

[49]Li, Ping*; Gao, Shiqiao; Niu, Shaohua; Liu, Haipeng; Cai, Huatong.An analysis of the coupling effect for a hybrid piezoelectric and electromagnetic energy harvester.Smart Materials and Structures, 2014, 23(6): 065016.

[50]Xing Hui Chen; Shi Qiao Gao.An Elevation Cosine Derivation Based Updating STAP Method for Non-Sidelooking Uniform Linear Array.Applied Mechanics and Materials, 2014, 556-562: 3662-3665.

[51]Xing Hui Chen; Shi Qiao Gao.A Space Time Autoaggressive Method Based on Parameters Estimation for Airborne MIMO Radar.Applied Mechanics and Materials, 2014, 556-562: 4496-4500.

[52]Xing Hui Chen; Shi Qiao Gao.Joint Doa-Frequency Estimation for Coherent Signal Identification.Applied Mechanics and Materials, 2014, 556-562: 4875-4879.

[53]Liu, Haipeng; Gao, Shiqiao; Zhou, Yong; Jin, Lei; He, Yunli; Liu, H.*.Optical measurement and analysis of dynamic characteristics of micro-comb structure.Nanotechnology and Precision Engineering, 2014, 12(1): 22-26.

[54]Li, Ping*; Gao, Shiqiao; Liu, Haipeng; Liu, Jun; Shi, Yunbo.Effects of package on the performance of MEMS piezoresistive accelerometers.MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2013, 19(8): 1137-1144.

[55]Fenglin Yao*; Shiqiao Gao; Jie Zhao; Haipeng Liu; Shaohua Niu; Lei Jin; Oukil Souad; Boudjemai Abdelmadjid; Boughanmi Nabil.The vibration and measurement of driving mode of the two-stage decoupled micro-machined gyroscope.International Journal on Smart Sensing and Intelligent Systems, 2013, 6(4): 1599-1616.

[56]Liu, Haipeng; Gao, Shiqiao; Jin, Lei; Liu, H.-P.*.Numerical simulation and experiment on penetration of projectile into multi-layer concrete target.Acta Armamentarii, 2013, 34(SUPPL.1): 68-72.

[57]Niu, Shaohua; Gao, Shiqiao; Wang, Dong; Kasperski, Michael; Agu, Ecevit; Niu, S.-H.*.Dynamic characteristics of the coupled system of footbridge and human.Journal of Beijing Institute of Technology, 2013, 22(3): 285-290.

[58]Zhang, Dong-Mei*; Gao, Shi-Qiao; Liu, Hai-Peng.Theory and applications of segment wavelet filtering.Transactions of Beijing Institute of Technology, 2013, 33(SUPPL.2): 117-120.

[59]Niu, Shaohua; Gao, Shiqiao; Jin, Lei; Niu, S.-H.*.A model based on acceleration for calculation of projectile penetration depth.Acta Armamentarii, 2012, 33(SUPPL2): 225-229.

[60]Liu, Haipeng*; Gao, Shiqiao; Shen, Li; Jin, Lei.Simulation and experiment of the oblique penetration of projectile into concrete target.Acta Armamentarii, 2012, 33(SUPPL2): 257-260.

[61]Li, Ping; Gao, Shiqiao; Jin, Lei; Shi, Yunbo; Li, P.*.Effects of package materials on performances of a piezoresistive MEMS accelerometer.Explosion and Shock Waves, 2012, 32(6): 623-628.

[62]Gao S, Niu S, Jin L ,Micro Size Effect of Silicon Material on the Performance of Micro-Gyroscope. Advanced Science Letters,2012;178-181

[63]Zhou, Yong*; Sun, Haigang; Gao, Shiqiao; Niu, Shaohua.Videometrics-based Detection of Vibration Linearity in MEMS Gyroscope.International Journal of Computational Intelligence Systems, 2011, 4(3): 321-328.

[64]Liu, Haipeng*; Gao, Shiqiao; Niu, Shaohua; Jin, Lei.Analysis on the adhesion of micro-comb structure in MEMS.International Journal of Applied Electromagnetics and Mechanics, 2010, 33(3-4): 979-984.

[65]Xin Jian, Liang; S Q , Gao.A MEMS Capacitive Gyroscope with Improved Reliability.Materials Science Forum, 2009, 628-629: 341-346.

[65]Gao, Shiqiao.A fuzzy model of the penetration resistance ofconcrete targets.International Journal of Impact Engineering, , 2009, 36(4):644-649

[66]Gao Shi-qiao; Jin Lei; Kasperski, M.; Liu Hai-peng; Li Ming-hui.Nonlinear analysis of a structure loaded by a stochastic excitation.Applied Mathematics and Mechanics (English Edition ), 2007, 28(11): 1479-1485.

[67]Shiqiao Gao; Haipeng Liu; Keijie Li; Huang, FL; Jin, L.Normal expansion theory for penetration of projectile against concrete target.Applied Mathematics and Mechanics (English Edition ), 2006, 27(4): 485-492.

[68]Gao Shiqiao; Jin Lei; Liu Haipeng.Dynamic response of a projectile perforating multi-plateconcrete targets.International Journal of Solids and Structures, 2004, 41(18-19): 4927-4938.

[69]高世橋 王寶興DYNAMICAL CALCULATION AND ANALYSIS ON PENETRATION OF TARGET PLATES BY TRUNCATED CONICAL PROJECTILES 《Applied Mathematics and Mechanics》(English Edition) 1986年 第11期

發表中文期刊論文：

[1]郭松林,高世橋,李澤章,李云彪.彈引系統攻角侵徹混凝土仿真與試驗研究[J].兵器裝備工程學報,2022,43(01):135-139+205.

[2]張冬梅,高世橋.侵徹過程中彈引螺紋連接結構振動特性研究[J].爆炸與沖擊,2022,42(03):66-77.

[3]付德義,高世橋,孔令行,賈海坤.基于相關向量信息熵的風電機組功率曲線構建方法研究[J].太陽能學報,2022,43(05):252-259.

[4]張冬梅,高世橋,李世中.侵徹過程中彈引系統的沖擊傳遞特性研究[J].兵器裝備工程學報,2020,41(12):27-34.

[5]戴政豪,高世橋,李澤章,張銥翔.基于包絡預測的動態閾值計層算法[J].兵器裝備工程學報,2020,41(12):53-56.

[6]徐蕭,金磊,黃莎玲,高世橋,張虎生.飛片沖擊載荷在環氧樹脂/印刷電路板/環氧樹脂界面處的傳遞特性[J].兵工學報,2020,41(09):1817-1825.

[7]彭世剛,劉海鵬,高世橋,金磊,李澤章.杠桿耦合式微機械陀螺儀特性分析[J].壓電與聲光,2020,42(01):118-122.

[8]高世橋,閆麗,金磊,張希洋,張廣義.非線性雙端固支梯形梁壓電俘能器結構設計與特性分析[J].農業機械學報,2019,50(07):398-405.

[9]劉峰,高世橋,牛少華,劉海鵬,肖東岳,楊旭.基于Jacobian矩陣的牛頓迭代法惠斯通電橋調零[J].傳感技術學報,2019,32(01):96-99.

[10]閆麗,高世橋,劉海鵬,張廣義.雙端固支式壓電俘能器的特性研究[J].壓電與聲光,2018,40(03):370-373+378.

[11]張廣義,金磊,高世橋,劉海鵬,牛少華.雙端固支梯形梁壓電俘能器機電耦合模型與試驗分析[J].北京理工大學學報,2018,38(06):600-605.

[12]路俊虎,金磊,高世橋,高春暉,呂慶山,劉海鵬.基于駐極體靜電俘能器的優化設計與實驗測試[J].工程科學學報,2018,40(04):492-499.

[13]李長龍,高世橋,牛少華,劉海鵬.高沖擊下引信用固態鉭電容的參數變化[J].爆炸與沖擊,2018,38(02):419-425.

[14]王彩鋒,高世橋,牛少華,劉海鵬.行人SMD模型參數對人群-結構耦合動力特性的影響[J].振動與沖擊,2018,37(03):91-97.

[15]董新博,劉海鵬,陳林雄,高世橋.雙端磁耦合式壓電振動俘能器結構設計[J].壓電與聲光,2017,39(05):711-716.

[16]劉峰,張丹,熊磊,朱清慧,高世橋.基于神經元的瓦楞橫切機實時控制系統設計[J].電機與控制應用,2017,44(10):19-24.

[17]徐蕭,高世橋,牛少華,申麗,劉海鵬,歐卓成.灌封材料對侵徹過載下彈載器件的防護分析[J].兵工學報,2017,38(07):1289-1300.

[18]陳林雄,高世橋,董新博.基于材料疲勞的壓電俘能器結構設計[J].壓電與聲光,2017,39(04):539-543.

[19]高春暉,高世橋,金磊,劉海鵬,牛少華.微機械結構中考慮邊界滑移的穿孔平板壓膜阻尼分析[J].北京理工大學學報,2017,37(06):562-566.

[20]張廣義,高世橋,劉海鵬,李平,牛少華.一種低頻壓電俘能器準靜態分析與能量收集試驗[J].北京理工大學學報,2017,37(06):656-660.

[21]張冬梅,高世橋,劉海鵬,牛少華.基于加速度測試及模糊模型的彈丸侵徹混凝土深度實時預測方法[J].振動與沖擊,2017,36(05):176-181+245.

[22]李長龍,高世橋,牛少華,劉海鵬.微諧振器縱向振動熱彈性耦合分析[J].北京理工大學學報,2016,36(12):1237-1242.

[23]王彩鋒,高世橋,劉海鵬,武麗森.壓電-電磁復合式俘能器設計及能量收集測試[J].壓電與聲光,2016,38(06):902-905.

[24]李長龍,高世橋,牛少華,劉海鵬.高沖擊環境對引信用儲能電容性能的影響[J].兵工學報,2016,37(S2):16-22.

[25]邱士起,牛少華,高世橋.沖擊載荷下石英晶體振蕩器失效機理分析[J].兵工學報,2016,37(S2):96-100.

[26]劉宗寶,高世橋,牛少華,劉海鵬,管延偉.侵徹起爆控制系統的過載信息實時采集處理與侵深識別技術[J].北京理工大學學報,2016,36(10):1025-1030.

[27]譚楊康,高世橋,張廣義.梯形梁壓電俘能器的特性研究[J].壓電與聲光,2016,38(04):579-583.

[28]王彩鋒,高世橋,譚楊康.基于人行通道測試系統的單人步行載荷建模[J].振動與沖擊,2016,35(12):136-140.

[29]張冬梅,高世橋,牛少華.侵徹過程中螺紋連接結構的應力傳遞仿真分析[J].兵工學報,2015,36(S1):284-288.

[30]牛少華,王華敏,高世橋.人行橋隨機行人載荷特性數值仿真研究[J].兵工學報,2015,36(S1):385-390.

[31]蔡華通,高世橋,李平,王華敏.壓電-電磁復合式俘能器的設計與實驗研究[J].壓電與聲光,2015,37(02):248-253+257.

[32]王華敏,牛少華,高世橋.單人步行荷載作用下多跨橋梁的動態特性分析[J].鋼結構,2015,30(02):16-21.

[33]王彩鋒,高世橋,金磊.Dynamic test methods for natural frequency of footbridge[J].Journal of Measurement Science and Instrumentation,2013,4(03):218-222.

[34]張冬梅; 高世橋; 牛少華.侵徹過程中螺紋連接結構的應力傳遞仿真分析.兵工學報, 2014, 36: 284-288.

[35]劉海鵬,高世橋,周勇,金磊,何運麗.微梳齒結構動態特性參量的光學測量與分析(英文)[J].納米技術與精密工程,2014,12(01):22-26.

[36]姚峰林,高世橋,劉宗寶,劉海鵬,申麗.硬目標侵徹引信半實物系統測試[J].彈箭與制導學報,2013,33(03):52-55.

[37]張冬梅; 高世橋; 劉海鵬.分段小波濾波原理及應用.北京理工大學學報, 2013, 33: 117-120.

[38]高世橋,王棟,牛少華.人-結構耦合系統動態特性分析[J].北京理工大學學報,2013,33(03):235-238.

[39]李平,高世橋,金磊,石云波.封裝材料對壓阻式加速度傳感器性能的影響[J].爆炸與沖擊,2012,32(06):623-628.

[40]申麗,高世橋,金磊.彈體斜侵徹混凝土仿真分析[J].彈箭與制導學報,2012,32(06):61-64.

[41]周勇,孫海剛,高世橋.基于視覺測量的微陀螺振動系統線性度測試研究[J].北京理工大學學報,2012,32(08):790-794+837.

[42]姚峰林,高世橋,趙婕,高崇仁.Vibration test of micro machined gyroscope based on high speed photography and SURF[J].Journal of Beijing Institute of Technology,2012,21(02):179-184.

[43]姚峰林,高世橋.基于高速攝影動態測試微陀螺振動[J].光學精密工程,2012,20(01):165-170.

[44]姚峰林,高世橋,高崇仁.基于視頻的塔式起重機振動測試[J].起重運輸機械,2011(12):72-75.

[45]姚峰林,高世橋.微陀螺梳齒靜電驅動力的計算方法[J].傳感技術學報,2011,24(09):1265-1269.

[46]杜井慶,高世橋,羅創,姚峰林,劉海鵬.基于PID算法的控制量按任意函數變化的一種控制方法[J].儀器儀表學報,2011,32(06):1317-1323.

[47]劉海鵬,高世橋,金磊.彈丸貫穿有限厚混凝土靶板實驗與仿真分析[J].兵工學報,2010,31(S1):59-63.

[48]劉海鵬,高世橋,金磊,郭雅君.彈侵徹混凝土靶面成坑的分階段分析[J].兵工學報,2009,30(S2):52-56.

[49]李明輝,高世橋,劉海鵬,梁新建.Computation of Capacitance for MEMS Comb-Drive Structures[J].Journal of Beijing Institute of Technology,2009,18(01):1-5.

[50]劉海鵬,高世橋,金磊.3D Numerical Simulation of Projectile Penetration into Concrete Target[J].Journal of Beijing Institute of Technology,2008,17(04):379-383.

[51]高世橋,金磊,M.卡斯巴斯基,劉海鵬,李明輝.隨機激勵下結構的非線性分析[J].應用數學和力學,2007(11):1318-1324.

[52]劉鵬,高世橋,劉海鵬,李明輝.基于RACE++構架的嵌入式信號處理機[J].探測與控制學報,2007(S1):12-15+20.

[53]韓麗,高世橋.混凝土靶體尺寸對過載影響的數值研究[J].計算機仿真,2007(06):17-19+26.

[54]劉鵬,高世橋,劉海鵬,李明輝.基于MicroTCA構架的導航信號處理機[J].彈箭與制導學報,2007(02):242-244.

[55]韓麗,高世橋,李明輝,劉海鵬.彈丸垂直貫穿混凝土靶的數值研究[J].北京理工大學學報,2006(11):953-956.

[56]李明輝,高世橋.隨機激勵下結構的非線性分析[J].戰術導彈技術,2006(05):34-38+43.

[57]曲大成,高世橋,劉玉樹.分布式微機電系統的多主體控制[J].電子科技大學學報,2006(03):367-370.

[58]韓麗,高世橋,李明輝,劉海鵬.基于侵深公式的彈沖擊混凝土目標的計算方法[J].北京理工大學學報,2006(05):393-396.

[59]韓麗,高世橋,李明輝,劉海鵬.彈侵徹半無限厚混凝土靶解析計算方法[J].彈箭與制導學報,2006(SA):1138-1139.

[60]曲大成,高茵,高世橋.高校投入產出效益與內部控制[J].北京理工大學學報(社會科學版),2006(02):113-117.

[61]高世橋,劉海鵬,李科杰,黃風雷,金磊.彈侵徹混凝土靶的法向膨脹理論[J].應用數學和力學,2006(04):431-438.

[62]高世橋,曲大成.高等學校投資效益的評價體系探討[J].北京理工大學學報(社會科學版),2005(03):80-83.

[63]劉海鵬,高世橋.彈侵徹半無限厚混凝土靶的實驗與分析[J].彈箭與制導學報,2005(S2):336-338+341.

[64]高世橋,曲大成.微機電系統(MEMS)技術的研究與應用[J].科技導報,2004(04):17-21.

[65]周勇,蘇偉,高世橋.引信與火控系統的適配性分析[J].北京理工大學學報,2004(01):53-56.

[66]高世橋 ,金磊 ,劉海鵬.INVESTIGATION OF RANDOM RESPONSE OF ROTATIONALSHELL WHEN CONSIDERING GEOMETRICNONLINEAR BEHAVIOUR[J].Applied Mathematics and Mechanics(English Edition),2001(11):1268-1272.

[67]高世橋,金磊,H.J.尼曼,劉海鵬.考慮旋轉殼幾何非線性時的隨機響應研究[J].應用數學和力學,2001(11):1142-1146.

[68]高世橋.引信模塊化設計研究[J].兵工學報,2001(02):185-188.

[69]高世橋,Niemann H J.幾何非線性對旋轉殼隨機響應的影響(英文)[J].Journal of Beijing Institute of Technology(English Edition),2001(01):23-28.

[70]高世橋,Niemann H J.受平穩強風載作用時旋轉殼的非線性隨機響應(英文)[J].Journal of Beijing Institute of Technology(English Edition),2001(01):29-33.

[71]金磊,高世橋,李文杰.MEMS固態引信硅微結構的力學分析與設計[J].兵工學報,2000(S1):45-46.

[72]李文杰,金磊,高世橋.用VC實現PC機對激光儀的通信控制[J].兵工自動化,2000(02):17-20.

[73]金磊,高世橋,李文杰.微加速度傳感器硅微結構設計[J].傳感器技術,2000(02):23-25.DOI:10.13873/j.1000-97872000.02.010.

[74]李文杰,金磊,高世橋.MEMS固態引信核心子系統的設計[J].探測與控制學報,2000(01):61-64.

[75]李文杰,賈云得,高世橋.立體視覺系統攝象機標定自動化[J].兵工自動化,2000(01):13-17.

[76]李志祥,龐海芍,高世橋.發揮經濟核算在高校管理中的地位與作用[J].北京高等教育,1998(06):47-48.

[77]高世橋,尼曼ＨＪ,曲克波.考慮非線性時旋轉殼的隨機響應分析[J].Journal of Beijing Institute of Technology(English Edition),1997(02):180-186.

[78]高世橋,臧巖,譚惠民.引信典型支承板受沖擊載荷作用時的非線性動力分析[J].北京理工大學學報,1996(04):395-400.

[79]高世橋,劉明杰,譚惠民.侵徹彈傾斜侵徹半無限混凝土目標時的動力分析[J].兵工學報,1995(04):46-50.

[80]高世橋,石庚辰,譚惠民,郭昭平.彈引系統以極大著角碰擊半無限目標時的動力分析[J].北京理工大學學報,1994(04):359-365.

[81]高世橋,曲克波.彈-引系統以極大著角碰擊薄靶板的動力學研究[J].兵工學報,1994(03):85-89.

[82]高世橋.具有物理非線性旋轉殼的隨機動力響應[J].Journal of Beijing Institute of Technology(English Edition),1994(01):25+19-25.

[83]高世橋,王寶興.具有薄弱環節引信貫穿靶板時的動力分析[J].兵工學報,1991(02):93-96.

[84]高世橋 ,譚惠民 ,馬寶華.引信安全系統的內稟理論[J].現代引信,1991(03):1-7.

[85]高世橋.有子午向隨機缺陷旋轉殼的隨機響應研究[J].北京理工大學學報,1991(01):25-32.

[86]譚惠民,高世橋.圓柱殼受軸向沖擊作用時的塑性動態屈曲研究[J].北京理工大學學報,1990(03):98-102.

[87]DOUG F.BRAUN,高世橋.電子保險和解除保險(裝置)安全性設計和試驗方法[J].現代引信,1989(04):19-23+40.

[88]Ken Willis ,高世橋.實現并驗證電子保險/解除保險裝置的方法[J].現代引信,1989(04):24-26.

[89]高世橋.國際合作專門小組會NUNN計劃修正稿[J].現代引信,1989(04):46-50.

[90]高世橋 ,石巖.引信性能指標的綜合評判[J].現代引信,1989(02):37-39+27.

[91]高世橋,盧文達.具有隨機幾何缺陷旋轉殼的陣風響應分析[J].北京理工大學學報,1989(01):61-66.

[92]高世橋,盧文達.解決諧波間耦合動力問題的攝動法[J].應用數學和力學,1988(11):975-980.

[93]高世橋 ,盧文達.PERTURBATION METHOD TO SOLVE THE COUPLE PROBLEM AMONG HARMONIC WAVES[J].Applied Mathematics and Mechanics(English Edition),1988(11):1039-1044.

[94]高世橋,盧文達.具有非軸對稱缺陷雙曲冷卻塔的動力有限元解[J].應用數學和力學,1988(06):475-480.

[95]高世橋 ,盧文達.DYNAMIC SOLUTION OF HYPERBOLIC COOLING TOWER WITH NONSYMMETRIC IMPERFECTIONS BY FINITE ELEMENT METHOD[J].Applied Mathematics and Mechanics(English Edition),1988(06):515-519.

[96]高世橋.具有軸對稱幾何缺陷圓柱殼的靜力分析[J].力學與實踐,1987(S1):24-28.

[97]高世橋.具有緩變軸對稱幾何缺陷圓柱殼的頻率分析[J].應用力學學報,1987(04):97-101+131.

[98]盧文達,高世橋.旋轉殼局部幾何缺陷對其頻率和振型的影響[J].應用數學和力學,1987(11):953-958.

[99]盧文達,高世橋.THE EFFECT LOCAL GEOMETRIC IMPERFECTIONS OF ROTATIONAL SHELL ON ITS NATURAL FREQUENCIES AND MODELS[J].Applied Mathematics and Mechanics(English Edition),1987(11):1013-1018.

[100]盧文達,高世橋.旋轉殼局部幾何缺陷對其系統固有頻率的影響[J].上海力學,1987(03):1-12.

[101]高世橋,王寶興.截錐形彈低中速貫穿薄靶板時的動力分析與計算[J].應用數學和力學,1986(11):1033-1038.

[102]王寶興,高世橋.引信著靶時的動態分析與計算[J].北京工業學院學報,1986(03):89-96.

發表會議論文：

[1]路俊虎,金磊,高世橋,劉海鵬,高春暉. 駐極體靜電俘能器的仿真分析和試驗驗證[C].中國力學大會-2017暨慶祝中國力學學會成立60周年大會論文集（B）.2017:1838-1842.

[2]劉海鵬,高世橋,金磊. 壓電-電磁復合式俘能器的性能測試[C].中國力學大會-2017暨慶祝中國力學學會成立60周年大會論文集（B）.2017:1869-1875.

[3]Liu, Haipeng*; Jin, Lei; Gao, Shiqiao.Design and Test on the Nonlinear Piezoelectric-electromagnetic Hybrid Energy Harvesting Structure.2017 7^th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2017-08-07 To 2017-08-11.

[4]Xiao Xu; Shiqiao Gao; Haipeng Liu; Shaohua Niu; Zhuocheng OU. High-speed collision analysis of pouring sealant byusing of nonlinear viscoelastic model.4^th International conference on protective structures, China, 2016-09-21 to 2016-09-23.

[5]張冬梅; 高世橋; 劉海鵬; 牛少華; 劉宗寶.Real-time calculation forstriking velocity based on penetration deceleration. 4^th International conference on protective structures, China, 2016-09-21 to 2016-09-23.

[6]徐蕭; 高世橋; 牛少華; 申麗; 歐卓成.彈體內部結構的動態響應分析.第八屆全國強動載效應及防護學術會議, 中國, 2016-07-15至2016-07-18.

[7]張冬梅; 高世橋; 劉海鵬; 牛少華.彈引螺紋連接剛度及引信安裝頻率研究.第八屆全國強動載效應及防護學術會議, 中國, 2016-07-15至2016-07-18.

[8]Wang Caifeng*; Gao Shiqiao; Niu Shaohua; Liu Haipeng; Tan Yangkang. Analysis of Vertical Walking Force of Single Footstep.6^th International Conference on Manufacturing Science and Engineering (ICMSE), 2015-11-28 to 2015-11-29.

[9]Liu, Hai-peng*; Gao, Shi-qiao; Jin, Lei.Study on the output characteristics of piezoelectric-electromagnetic hybrid harvest structure.12^th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA), 2016 to 2016-08-31.

[10]Gao, Shiqiao*; Zhang, Guangyi; Jin, Lei; Li, Ping; Liu, Haipeng.Characteristics of the piezoelectric energy-harvesting from the torsional vibration of thin-walled cantilever beams.12^th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA), 2016 to 2016-08-31.

[11]Wang Caifeng*; Gao Shiqiao; Jin Lei; Chen Linxiong.Ambient Vibration Survey and Vibration Serviceability Evaluation on Footbridges. International Conference on Chemical, Material and Food Engineering (CMFE), 2015-07-25 to 2015-07-26.

[12]張冬梅,高世橋,劉海鵬. 侵徹過程中螺紋連接結構的應力傳遞仿真分析[C].第六屆全國強動載效應及防護學術會議暨2014年復雜介質/結構的動態力學行為創新研究群體學術研討會論文集.2014:232-237.

[13]劉海鵬,高世橋,金磊. 彈侵徹混凝土靶面成坑機理分析[C].第六屆全國強動載效應及防護學術會議暨2014年復雜介質/結構的動態力學行為創新研究群體學術研討會論文集.2014:283-287.

[14]Liu, Haipeng*; Gao, Shiqiao; Jin, Lei; He, Yunli. Corner Effect of Micro-Comb Capacitive Structure.15th Annual Conference of the Chinese-Society-of-Micro-Nano-Technology (CSMNT) / 4^th International Conference of the Chinese-Society-of-Micro-Nano-Technology (CSMNT), 2013-11-03 To 2013-11-06.

[15]劉海鵬,高世橋,金磊. 彈丸侵徹多層混凝土靶的數值模擬與實驗[C].第五屆全國強動載效應及防護學術會議暨復雜介質/結構的動態力學行為創新研究群體學術研討會論文集.2013:322-329.

[16]Guan, Yanwei; Gao, Shiqiao; Shen, Li; He, Yunli.Study on effect of van der Waals force and Casimir force to microsystem.2013 2^nd International Conference on Measurement, Instrumentation and Automation, ICMIA 2013, China,Guangxi Zhuang Autonomous Region,Guilin, 2013-04-23 to 2013-04-24.

[17]Niu, Shaohua; Gao, Shiqiao; Du, Jingqing.A calculation model of pull-off force with edge-effect.2^nd International Conference on Opto-Electronics Engineering and Materials Research, OEMR 2013, 2013-10-19 to 2013-10-20.

[18]Liu, Haipeng; He, Yunli; Gao, Shiqiao; Tan, Yangkang; Jin, Lei.Structure simulation analysis of piezoelectric energy harvesting device.2013 International Forum on Mechanical and Material Engineering, IFMME 2013, China,Guangdong,Guangzhou, 2013-06-13 to 2013-06-14.

[19]Zhang, Zhenquan*; Liu, Haipeng; Gao, Shiqiao.The design of the closed-loop control system of micro machined gyroscope.2^nd International Conference on Instrumentation and Measurement, Computer, Communication and Control (IMCCC), 2012-12-08 To 2012-12-10.

[20]Shen, Li; Gao, Shiqiao; Guan, Yanwei.The effect of casimir force to the performance of the micro-accelerometer.14^th Annual Conference and the 3rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[21]He, Yunli; Liu, Haipeng; Gao, Shiqiao; Wang, Caifeng.Capillary condensation adhesion phenomena and analysis of the micromechanical gyroscope.14^th Annual Conference and the 3rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[22]Jiang, Anran; Gao, Shiqiao; Yao, Fenglin; He, Yunli.Structure design and simulation analysis of multiple micro piezoelectric cantilevers.14^th Annual Conference and the 3rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[23]Niu, Shaohua; Hong, Dandan; Gao, Shiqiao; Niu, S.*.A PID&AGC method for micro vibration gyroscope drive system.14th Annual Conference and the 3^rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[24]Li, Ping; Gao, Shiqiao; Jin, Lei; Liu, Haipeng; Shi, Yunbo; Li, P.*.Influence of package on micro-accelerometer sensitivity.14th Annual Conference and the 3^rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[25]Liu Haipeng; Zhang Zhenquan; Gao Shiqiao; Jin Lei.Analysis on the sticking failure of micro-comb driving structure.14th Annual Conference and the 3^rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, 2012-11-04 to 2012-11-07.

[26]劉海鵬,高世橋,金磊. 彈丸侵徹多層混凝土靶的數值模擬與實驗[C].第五屆全國計算爆炸力學會議論文摘要.2012:73.

[27]劉宗寶,高世橋,杜井慶. 測量數據剔除粗大誤差與平滑處理的一種算法[C].第三十一屆中國控制會議論文集D卷.2012:1819-1824.

[28]Liu, Zongbao; Gao, Shiqiao; Yao, Fenglin; Du, Jingqing; Liu, Z.*. Hardware-in-the-loop simulation system of penetration fuze based on labVIEW.2012 International Conference on Advances in Mechanics Engineering, ICAME 2012, 2012-08-03 to 2012-08-05.

[29]Yuan, Xiaodong*; Gao, Shiqiao. One Kind of Flight Control System Design for Separation Section in Cruise Missile.2^nd International Conference on Mechatronics and Intelligent Materials (MIM 2012), 2012-05-18 to 2012-05-19.

[30]Li, Ping*; Shi, Yun-Bo; Lu, Jun; Gao, Shi-Qiao.Study on a novel MEMS high G acceleration sensor.2^nd International Conference on Mechatronics and Intelligent Materials (MIM 2012), 2012-05-18 to 2012-05-19.

[31]Shen Li*; Gao Shiqiao; Zhang Zhenquan; Jiang Anran. Microscale Effect of Elastic Beam of The Micro-machined Gyroscope.International Conference on Frontiers of Mechanical Engineering and Materials Engineering (MEME 2012), 2012-07-27 to 2012-07-29.

[32]Shen Li*; Gao Shiqiao; Jiang Anran; Wang Caifeng. Analysis of Micro Structure's Elastic Stiffness.International Conference on Frontiers of Mechanical Engineering and Materials Engineering (MEME 2012), 2012-07-27 to 2012-07-29.

[33]Gao, Shiqiao*; Wang, Dong; Jin, Lei. Influence of the Human Body on the Characteristics of A Pedestrian Bridge.18th ISSAT International Conference on Reliability and Quality in Design, 2012-07-26 to 2012-07-28.

[34]Liu, Hai-peng*; Gao, Shi-qiao; Jin, Lei.Analysis on the Detection Capacitance of Comb Micro-Machined Gyroscope.2^nd International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2011), 2011-12-11 to 2011-12-13.

[35]劉海鵬,高世橋,金磊. 彈丸侵徹混凝土靶板成坑實驗及量綱分析[C].第十屆全國沖擊動力學學術會議論文摘要集.2011:64.

[36]Li, Minghui; Deng, Jiahao; Gao, Shiqiao; Li, M.*.Novel touch mode capacitive pressure sensor based on SiC.IEEE 2011 10^th International Conference on Electronic Measurement and Instruments, ICEMI 2011, China,Sichuan,Chengdu, 2011-08-16 to 2011-08-18.

[37]The dynamic characteristics of a couple system by pedestrian bridge and walking persons
Wang, Dong; Gao, Shiqiao; Kasperski, Michael; Liu, Haipeng; Jin, Lei; Wang, D.*
2011 International Conference on Green Building, Materials and Civil Engineering, GBMCE 2011, 2011-08-22 to 2011-08-23.

[38]Wang, Dong; Gao, Shiqiao; Kasperski, Michael; Liu, Haipeng; Jin, Lei; Wang, D.*.Simulation of the dynamic characteristics of the coupled system structure.2011 International Conference on Green Building, Materials and Civil Engineering, GBMCE 2011, 2011-08-22 to 2011-08-23.

[39]Yao, Fenglin; Gao, Shiqiao; Wang, Caifeng; Yao, F.*. Stiffness computation of a decoupled micro gyroscope and the effect of machining error.2011 2nd International Conference on Artificial Intelligence, Management Science and Electronic Commerce, AIMSEC 2011, China,Henan,Zhengzhou, 2011-08-08 to 2011-08-08

[40]Yao, Fenglin*; Gao, Shiqiao; Liang, Xinjian. Lengthwise Detection of High Linearity Micromachined Gyroscope.International Conference on Frontiers of Manufacturing Science and Measuring Technology (ICFMM2011), 2011-06-23 to 2011-06-24.

[41]Niu, Shaohua*; Gao, Shiqiao; Liu, Haipeng; Jin, Lei. An ADRC Method for Vibrating MEMS Gyrosocope Drive.International Conference on Mechatronics and Intelligent Materials, 2011-05-21 to 2011-05-22.

[42]Du, Jingqing; Gao, Shiqiao; Niu, Shaohua; Du, J.*.Design and realization of hard-target intelligent detonation fuse.2010 International Conference on Intelligent Computation Technology and Automation, ICICTA 2010, China,Hunan,Changsha, 2010-05-11 to 2010-05-12.

[43]Du, Jingqing; Gao, Shiqiao; Niu, Shaohua; Du, J.*.An algorithm for measurement data eliminating noise and smoothing.2010 3^rd International Conference on Advanced Computer Theory and Engineering, ICACTE 2010, China,Sichuan,Chengdu, 2010-08-20 to 2010-08-22.

[44]Du, Jingqing; Gao, Shiqiao; Du, J.*.Hardware-in-the-loop simulation of a projectile penetrating half-infinite concrete targets.29^th Chinese Control Conference, CCC'10, China,Beijing, 2010-07-29 to 2010-07-31.

[45]杜井慶,高世橋. 彈侵徹半無限厚混凝土靶的半實物仿真[C].第二十九屆中國控制會議論文集.,2010:4321-4325.

[46]Shi, Ji-Tao*; Gao, Shi-Qiao.RESEARCH OF OVERCROSS STRUCTURE DYNAMICS MODEL AND SECURITY BY PEDESTRIAN LOAD.11^th International Symposium on Structural Engineering, 2010-12-18 to 2010-12-20

[47]Du Jingqing*; Gao Shiqiao; Yao Fenglin; Luo Chuang; Liu Haipeng.An Improved Control Method Based on PID Algorithm.2nd IEEE International Conference on Advanced Computer Control, 2010-03-27 to 2010-03-29.

[48]Liu, Hai-peng*; Gao, Shi-qiao; Niu, Shaohua; Jin, Lei.The micro mechanical environment on the comb capacitive micro-machined gyroscope.2^nd International Conference on Smart Materials and Nanotechnology in Engineering, 2009-07-08 To 2009-07-11.

[49]Liu, Haipeng; Gao, Shiqiao; Niu, Shaohua.Analysis on Stiction of Micro-comb Structure in MEMS.14^th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2009), 2009-09-20 to 2009-09-24.

[50]Liang, X. J.; Gao, S. Q..The Adhesion Failure Analysis of the MEMS Gyroscope with Comb Capacitor.8^th International Conference on Reliability, Maintainability and Safety (ICRMS 2009), 2009-07-20 to 2009-07-24.

[51]Liang, X. J.; Gao, S. Q..A MEMS Capacitive Gyroscope with Improved Reliability.13^th International Manufacturing Conference in China, 2009-09-21 to 2009-09-23.

[52]劉海鵬,高世橋,梁新建. 一種基于空穴膨脹理論的侵徹混凝土修正模型[C].第九屆全國沖擊動力學學術會議論文集（上冊）.2009:309-310.

[53]劉海鵬,高世橋,金磊. 彈丸貫穿有限厚混凝土靶板實驗與仿真分析[C].第九屆全國沖擊動力學學術會議論文集（上冊）.2009:334-337.

[54]劉海鵬,高世橋,金磊. 彈侵徹混凝土靶面成坑分析[C].第九屆全國沖擊動力學學術會議論文集（上冊）.2009:338-342.

[55]杜井慶,高世橋,寧展. 基于PCI6040的全自動表面張力測量儀的設計與實現[C].2008中國儀器儀表與測控技術進展大會論文集（Ⅲ）.2008:235-238.

[56]Liu, Haipeng; Gao, Shiqiao; Jin, Lei; Liang, Xinjian.A modified model for penetrating into concrete target.7^th International Conference on Shock and Impact Loans on Structures, 2007-10-17 to 2007-10-19.

[57]Gao, Shiqiao; Jin, Lei; Liu, Haipeng; Liang, Xinjian; Han, Li.An analytical penetration model based on the normal cavity-expansion theory.7^th International Conference on Shock and Impact Loans on Structures, 2007-10-17 to 2007-10-19.

[58]Gao, Shi-qiao; Jin, Lei; Liu, Hai-peng; Li, Ming-hui; Kasperski, M..Responses of a nonlinear MEMS structural system loaded by a non-stationary stochastic excitation.5^th International Conference on Nonlinear Mechanics (ICNM-V), 2007-06-11 to 2007-06-14.

[59]Liu, Hai-peng; Gao, Shi-qiao; Jin, Lei.Influences of micro forces on manufacturing and packaging of micro inertial devices.5^th International Conference on Nonlinear Mechanics (ICNM-V), 2007-06-11 to 2007-06-14.

[60]梁新建,高世橋. 解耦型微機械陀螺儀氣體阻尼機理分析[C].2007'儀表，自動化及先進集成技術大會論文集（二）.2007:91-95.

[61]李明輝,高世橋. 解耦型微陀螺儀的設計、制作與性能分析[C].2007'儀表，自動化及先進集成技術大會論文集（二）.2007:60-64.

[62]杜井慶,高世橋,付德義,李明輝. 基于PID算法的控制量按線性函數變化的一種控制方法[C].2007'儀表，自動化及先進集成技術大會論文集（二）.2007:590-593.

[63]胡玉川,高世橋. 基于ARM與DSP的雷達信號處理機的設計[C].2006“數學技術應用科學”.2006:200-201-202-203-204.